BASF Ultrafuse PLA


Actie prijs€141,99
Op voorraad. Levertijd 3-6 werkdagen


Ultrafuse PLA

Ultrafuse PLA is Poly-Lactic-Acid, a biodegradable polymer with a low melting point. It is an easy material to print with and Ultrafuse PLA gives a smooth printing result. This most used 3D printing material is available in a wide range of RAL colors and translucent variants.

When properly cooled, PLA has a higher maximum printing speed, lower layer heights, and sharper printed corners. Combining this with low warping of the print makes it a popular plastic for makers, prosumers and schools.

Tips & Tricks
  • Print Temperature: 210-220 degrees
  • Heated Bed: 60 degrees
  • Print Speed: 30-80 mm/s
Material Properties
  • Tensile Strength (MPa): 21.2 (ZX), 34.7 (XY)
  • Flexural Modulus (MPa): 1715 (ZX), 1708 (XZ), 1860 (XY)
  • Elongation at Break: 1.2 % (ZX), 4.2 % (XY)
  • Impact Strength Izod notched (kJ/m2): 1.6 (ZX), 2.1 (XZ), 3.3 (XY)
  • Impact Strength Izod unnotched (kJ/m2): 4.7 (ZX), 9.6 (XZ), 11.0 (XY)
  • HDT @ 0.45 MPa: 65 oC
BASF Quality Control

The best raw materials available is selected from renowned suppliers. Production on state-of-the-art computer-controlled machinery guarantees a truly consistent filament, also between colors and batches. It will perform as expected every time.

All BASF products are 100% traceable to the source.


Betaling en beveiliging

American Express Apple Pay Google Pay iDEAL PayPal Shop Pay Union Pay

Je betalingsgegevens worden veilig verwerkt. We slaan geen gegevens op en hebben geen toegang tot uw gegevens.

Op basis van jou intreresses

Recently viewed